Paolo Minetola - Dissemin

All papers authored by Paolo Minetola

This paper was not found in any repository, but could be made available legally by the author.

2024 Paolo Minetola

A preliminary study on multi-material fused filament fabrication of an embedded strain gauge for low-cost real-time monitoring of part strain

Upload

Erika Lannunziata, Giovanna Colucci, Paolo Minetola

, Alberto Giubilini

Effect of annealing treatment and infill percentage on 3D-printed PEEK samples by Fused Filament Fabrication

Upload

2023 Alberto Giubilini, Paolo Minetola

Multimaterial 3D printing of auxetic jounce bumpers for automotive suspensions

Upload

Distributing this paper is prohibited by the publisher

Erika Lannunziata

, Alberto Giubilini

, Abdollah Saboori

, Paolo Minetola

Influence of Process Parameters on Compression Properties of 3D Printed Polyether-Ether-Ketone by Fused Filament Fabrication

Upload

Alberto Giubilini

, Massimo Messori, Federica Bondioli, Paolo Minetola

, Luca Iuliano, Gustav Nyström

, Katharina Maniura-Weber

, Markus Rottmar

, Gilberto Siqueira

3D-Printed Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)-Cellulose-Based Scaffolds for Biomedical Applications

Upload

Mankirat Singh Khandpur, Paolo Minetola

, Vito Stiuso, Serena Rifuggiato, Luca Fontana, Erika Lannunziata, Alberto Giubilini, Luca Iuliano

An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data

Upload

Alberto Giubilini

, Giovanna Colucci, Giorgio De Trane, Federico Lupone, Claudio Badini, Paolo Minetola

, Federica Bondioli, Massimo Messori

Novel 3D Printable Bio-based and Biodegradable Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Microspheres for Selective Laser Sintering Applications

Upload

This paper is made freely available by the publisher.

Gianna Maria Nardi

, Marta Mazur

, Roberta Grassi, Serena Rifuggiato, Vito Stiuso, Joanna Janiszewska-Olszowska

, Livia Ottolenghi

, Ersilia Barbato, Paolo Minetola

, Luca Iuliano

Enamel Analysis by 3D Scanning after Three Orthodontic Clean-Up Procedures: An In-Vitro Test of a New Piezoelectric Tool

Download from doi.org

2022 Luca Fontana

, Alberto Giubilini, Rossella Arrigo

, Giulio Malucelli

, Paolo Minetola

Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses

Download from doi.org

Domenico A. Maisano, Elisa Verna, Paolo Minetola

, Vincenzo Lunetto, Angioletta R. Catalano

, Paolo C. Priarone

A structured comparison of decentralized additive manufacturing centers based on quality and sustainability

Download from link.springer.com

Paolo Minetola

, Vinicius de Freitas Pacheco, Marcelo Massarani, Flaviana Calignano, Giovanni Marchiandi

Proposal of an Innovative Benchmark for the Evaluation of 3D Printing Accuracy for Photopolymers

Download from doi.org

Vito Stiuso, Paolo Minetola

, Alberto Giubilini, Luca Fontana, Mankirat Singh Khandpur, Serena Rifuggiato, Giovanni Marchiandi

Benchmarking analysis of digital light processing resins in terms of dimensional accuracy and geometric tolerances

Upload

Francesco Lupi

, Mohammed M. Mabkhot, Miha Finžgar

, Paolo Minetola

, Dorota Stadnicka

, Antonio Maffei, Paweł Litwin, Eleonora Boffa, Pedro Ferreira, Primož Podržaj, Riccardo Chelli, Niels Lohse, Michele Lanzetta

Toward a sustainable educational engineer archetype through Industry 4.0

Upload

This paper was not found in any repository; the policy of its publisher is unknown or unclear.

Dario Antonelli, Paolo Minetola

, Paolo Claudio Priarone, Antonio Maffei, Michele Lanzetta, Dorota Stadnicka, Primož Podržaj

Introducing sustainability themes in STEM education: evidences from some European countries

Upload

Domenico A. Maisano, Elisa Verna, Paolo Minetola

, Vincenzo Lunetto, Paolo Claudio Priarone

Quality and sustainability benchmarking of decentralized additive manufacturing processes

Upload

Serena Rifuggiato, Paolo Minetola

, Vito Stiuso, Mankirat Singh Khandpur, Luca Fontana, Luca Iuliano

An investigation of the influence of 3d printing defects on the tensile performance of ABS material

Upload

Luca Fontana, Paolo Minetola

, Luca Iuliano, Serena Rifuggiato, Mankirat Singh Khandpur, Vito Stiuso

An investigation of the influence of 3d printing parameters on the tensile strength of PLA material

Upload

2021 Lorenzo Franceschini

, Francesca Vecchi

, Francesco Tondolo

, Beatrice Belletti

, Javier Sánchez Montero

, Paolo Minetola

Variability in Section Loss and Maximum Pit Depth of Corroded Prestressing Wires

Upload

P. Minetola

, M. S. Khandpur, L. Iuliano, F. Calignano, M. Galati, L. Fontana

In-Situ Monitoring for Open Low-Cost 3d Printing

Upload

Francesca Vecchi, Lorenzo Franceschini, Francesco Tondolo, Beatrice Belletti, Javier Sánchez Montero, Paolo Minetola

Corrosion morphology of prestressing steel strands in naturally corroded PC beams

Upload

Missing publications? Search for publications with a matching author name.

Researcher

Statistics

Refine

All papers authored by Paolo Minetola