Bart van Esch
research.tue.nl
0000-0002-4478-5925
Eindhoven University of Technology
72 papers found
Refreshing results…
Inaccuracies in the inverse heat conduction problem solution and their effect on the estimation of heat fluxes during quenching
Fish damage assessment during the passage through traditional and fish-friendly axial-flow pumps with Lagrangian tracking approach
Study on the flow pattern and pressure fluctuation in a vertical volute centrifugal pump with vaned diffuser under near stall conditions
Experimental and Numerical Investigation on the Transient Cavitating Flows in a Mixed Flow Pump With Different Number of Blades at Startup
Analysis, Design, and Validation of a Vaned Diffuser for Improved Fish Friendliness
Numerical and experimental investigations on inflow loss in the energy recovery turbines with back-curved and front-curved impeller based on the entropy generation theory
Vortex suppression of the tip leakage flow over a NACA0009 hydrofoil via a passive jet induced by the double-control-hole
A comparative study on the reducing flow rate design method for a desalination energy recovery pump as turbine
Improvement of the SST γ-Reθt transition model for flows along a curved hydrofoil
Analysis On the Inception of the Magnetohydrodynamic Flow Instability in the Annular Linear Induction Pump Channel
Kickstart procedure of a tidal power plant
Film boiling in quench cooling with high-temperature jets
Quench cooling of fast moving steel plates by water jet impingement
Assessment of turbulence models for the boundary layer transition flow simulation around a hydrofoil
Experimental and numerical investigation on the effect of tip leakage vortex induced cavitating flow on pressure fluctuation in an axial flow pump
The Run Out Table in the Lab: Quenching of Fast Moving Steel Plates
Part Load Instability and Rotating Stall in a Multistage Low Specific Speed Pump
Experimental Investigation of the Transient Patterns and Pressure Evolution of Tip Leakage Vortex and Induced-Vortices Cavitation in an Axial Flow Pump
The nature of boiling during rewetting of surfaces at temperatures exceeding the thermodynamic limit for water superheat
Design of a New Type of Balance Drum to Reduce Axial Loading in Centrifugal Pumps
Missing publications? Search for publications with a matching author name.