Jason Nicholas
www.egr.msu.edu
0000-0001-7986-209X
Michigan State University
59 papers found
Refreshing results…
Detection of thin film phase transformations at high-pressure and high-temperature in a diamond anvil cell
Spontaneous Imbibition Velocities in Porous Metal Layers on Ceramic Substrates Calculated Using Microstructural Analyses
High temperature thermo-mechanical properties of praseodymium doped ceria thin films measured two ways
Silicon Contamination of the Praseodymium Doped Ceria Oxygen Surface Exchange Coefficient
Updating the Notion that Poor Cathode Performance Typically Dominates Overall Solid Oxide Fuel Cell Response
Erratum—Evidence that Surface-Segregated Sr Phases Can Be Removed in LSCF via Ceria Pre-Infiltration, Are Less Apt to Form in SSC [J. Electrochem. Soc., 168, 024522 (2021)]
Evidence that Surface-Segregated Sr Phases Can Be Removed in LSCF via Ceria Pre-Infiltration, Are Less Apt to Form in SSC
Pt current collectors artificially boosting praseodymium doped ceria oxygen surface exchange coefficients
Three-dimensional phase field sintering simulations accounting for the rigid-body motion of individual grains
Atomic Layer Deposited Zirconia Overcoats as On-Board Strontium Getters for Improved Solid Oxide Fuel Cell Nano-Composite Cathode Durability
Enhanced liquid metal wetting on oxide surfaces via patterned particles
Mechano-Electro-Chemical Insights into the Danger of Using Precious Metal Electrodes for Oxygen Surface Exchange Measurements
Atomic Layer Deposited Zirconia Overcoats as On-Board Strontium Getters for Improved Solid Oxide Fuel Cell Nanocomposite Cathode Durability
Composition, crystallography, and oxygen vacancy ordering impacts on the oxygen ion conductivity of lanthanum strontium ferrite
Patterned Nickel Interlayers for Enhanced Silver Wetting, Spreading and Adhesion on Ceramic Substrates
A Comparison of Strontium Titanium Iron Oxide Perovskite Oxygen Surface Exchange Coefficients Obtained from Wafer Curvature vs. Optical Relaxation
Degradation Mitigation of Infiltrated Solid Oxide Fuel Cell Cathodes Via Atomic Layer Deposited Zirconia Overcoats
(Invited) Surface Contaminant Effects on the Properties of Pr-Doped Ceria Determined Via Wafer Curvature and X-Ray Diffraction Measurements
Correlation between the wafer curvature and fluorescence of pulsed laser deposited ruby thin films stressed to ∼2 GPa
Durable, Impermeable Brazes for Solid Oxide Fuel Cells. Final Report
Missing publications? Search for publications with a matching author name.