Closed access until 17/11/2017. ; In plated beam, an adhesive is used primarily to adhere the external plate to the concrete beam to achieve a composite action. Even though some work has been found to indicate that the choice of softer adhesive increased the capacity of beam (MacDonald & Calder, 1982), relatively stiffer adhesives have been largely assumed to provide better strengthening. Largely, due to the fact that adhesive has been widely considered as an insignificant structural component towards the capacity of a composite beam; material capabilities (if not structural) of adhesive have also been ignored for further research towards studying its effects on premature failures (particularly debonding). Under mixed-mode loading, the adoption through discretisation of Cohesive Zone Model as a bulk material (indicative of adhesive component) and to simulate interfacial cracks is shown here to achieve the objectives. The outcomes of the research indicate the critical material properties of adhesive in all directions, such as stiffness, strength and crack energy, play crucial role in controlling the behaviour of modes of failure. Further, based on this study, recommendations have been proposed on the choice of adhesive type at different locations of plated beam so as to capture a failure warning and avoid catastrophic failure.