AbstractThe interfaces in devices made of two-dimensional materials such as MoS₂ can effectively control their optoelectronic performance. However, the extent and nature of these deterministic interactions are not fully understood. Here, we investigate the role of substrate interfaces on the photodetector properties of MoS₂ devices by studying its photocurrent properties on both SiO₂ and self-assembled monolayer-modified substrates. Results indicate that while the photoresponsivity of the devices can be enhanced through control of device interfaces, response times are moderately compromised. We attribute this trade-off to the changes in the electrical contact resistance at the device metal-semiconductor interface. We demonstrate that the formation of charge carrier traps at the interface can dominate the device photoresponse properties. The capture and emission rates of deeply trapped charge carriers in the substrate-semiconductor-metal regions are strongly influenced by exposure to light and can dynamically dope the contact regions and thus perturb the photodetector properties. As a result, interface-modified photodetectors have significantly lower dark-currents and higher on-currents. Through appropriate interfacial design, a record high device responsivity of 4.5 × 10³ A/W at 7 V is achieved, indicative of the large signal gain in the devices and exemplifying an important design strategy that enables highly responsive two-dimensional photodetectors.