Published in

Elsevier, Nuclear Materials and Energy, (9), p. 157-164, 2016

DOI: 10.1016/j.nme.2016.04.007

Links

Tools

Export citation

Search in Google Scholar

Deuterium retention in tungsten under combined high cycle ELM-like heat loads and steady-state plasma exposure

This paper is available in a repository.
This paper is available in a repository.

Full text: Download

Green circle
Preprint: archiving allowed
Red circle
Postprint: archiving forbidden
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

To investigate the synergistic effects of fuel retention in tungsten, experiments were performed in the linear plasma device PSI-2 where the transient heat loads were applied by a high energy laser during the steady-state plasma operation. The impact on the deuterium (D) retention of simultaneous and sequential exposures to laser and plasma has been investigated. A significant increase of D retention, more than a factor of 12, has been observed during the simultaneous transient heat loads and plasma exposure. Successive exposures to transient heat loads and deuterium plasma also show the increased content of D-atoms by more than a factor of 3.6 in comparison to the pure plasma loading. In both cases the increase is most likely due to enhanced hydrogen clustering by the thermal shock exposures, due to an increased mobility of D atoms along the shock-induced cracks as well as to increased diffusion of D atoms into the W material caused by strong temperature gradients during the laser pulse exposure. Comparison of the NRA and TDS measurements shows that only 34% of the retained deuterium in the tungsten specimen is located inside the near-surface layer (d