IOP Publishing, Journal of Instrumentation, 02(7), p. P02010-P02010, 2012
DOI: 10.1088/1748-0221/7/02/p02010
Full text: Download
Silicon photomultipliers (SiPM) are the photon detectors chosen for the tracking readout in NEXT, a neutrinoless \bb decay experiment which uses a high pressure gaseous xenon time projection chamber (TPC). The reconstruction of event track and topology in this gaseous detector is a key handle for background rejection. Among the commercially available sensors that can be used for tracking, SiPMs offer important advantages, mainly high gain, ruggedness, cost-effectiveness and radio-purity. Their main drawback, however, is their non sensitivity in the emission spectrum of the xenon scintillation (peak at 175 nm). This is overcome by coating these sensors with the organic wavelength shifter tetraphenyl butadiene (TPB). In this paper we describe the protocol developed for coating the SiPMs with TPB and the measurements performed for characterizing the coatings as well as the performance of the coated sensors in the UV-VUV range. © 2012 IOP Publishing Ltd and SISSA. ; Spanish MICINN [CSD2008-00037, CSD2007-00042, CSD2007-00010] ; FEDER [FPA2008-03456, FPA2009-13697-C04-01] ; FCT ; FEDER through program COMPETE [PTDC/FIS/103860/2008] ; U.S. Department of Energy [DE-FC52-08NA28752] ; Català Pérez, JM.; Esteve Bosch, R.; Herrero Bosch, V.; Marí Romero, AF.; Monzó Ferrer, JM.; Mora Mas, FJ.; Toledo Alarcón, JF. (2012). SiPMs coated with TPB: coating protocol and characterization for NEXT. Journal of Instrumentation. 7(2):1-23. doi:10.1088/1748-0221/7/02/P02010. ; Senia ; 1 ; 23 ; 7 ; 2