Dissemin is shutting down on January 1st, 2025

Published in

Materials Research Society, Materials Research Society Symposium Proceedings, (1295), 2011

DOI: 10.1557/opl.2011.38

Links

Tools

Export citation

Search in Google Scholar

Microstructure and Oxidation Resistance of Cr-Ta-Si alloys

Journal article published in 2011 by Ayan Bhowmik ORCID, Hon Tong Pang, Steffen Neumeier, Howard J. Stone, Ian Edmonds
This paper was not found in any repository, but could be made available legally by the author.
This paper was not found in any repository, but could be made available legally by the author.

Full text: Unavailable

Red circle
Preprint: archiving forbidden
Green circle
Postprint: archiving allowed
Green circle
Published version: archiving allowed
Data provided by SHERPA/RoMEO

Abstract

ABSTRACTThe phase equilibria and oxidation resistance of alloys lying near the Cr-rich end of the Cr- Ta-Si system have been investigated. Samples were prepared by arc-melting and homogenized at 1300°C for 500hrs. Identification of the phases present and their compositions were carried out using x-ray diffraction and electron probe micro-analysis and the ternary phase diagram on the Cr-rich end was plotted. A three-phase equilibria was found to exist between an A2 Cr-solid solution, a hexagonal Laves phase and the A15 Cr3Si intermetallic phase for alloys with higher contents of Si.Thermo-gravimetric analysis of the alloys at 1100°C demonstrated an improvement in the oxidation resistance of the ternary alloys with increasing Si-content. The microstructures of the oxidized samples revealed the formation of a thick chromia layer on top of a Cr,Ta-mixed oxide layer and an internal oxidation zone for all the alloys. A protective silica layer was not observed to form in any of the alloys tested.