Published in

IOP Publishing, Japanese Journal of Applied Physics, 11R(39), p. 6343, 2000

DOI: 10.1143/jjap.39.6343

Links

Tools

Export citation

Search in Google Scholar

Introduction of Selectively Nucleated Lateral Crystallization of Lead Zirconate Titanate Thin Films for Fabrication of High-Performance Ferroelectric Random Access Memory

Journal article published in 2000 by Jang-Sik Lee ORCID, Seung-Ki Joo
This paper was not found in any repository, but could be made available legally by the author.
This paper was not found in any repository, but could be made available legally by the author.

Full text: Unavailable

Green circle
Preprint: archiving allowed
Orange circle
Postprint: archiving restricted
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

We found that large single grains of lead zirconate titanate (PZT) thin film of which grain size was as large as 40 µm in length could be fabricated by lateral crystallization from the seeds. The seeds were prepared on the Pt substrate in the form of crystallized PZT dots. The electrical characteristics of PZT thin films (Pt/PZT/Pt structure) obtained by selectively nucleated lateral crystallization (SNLC) were found to be superior to those of polycrystalline PZT thin films. PZT thin films obtained by SNLC showed a leakage current density of 8×10-8 A/cm2, a breakdown field of 1240 kV/cm, a saturation polarization of 42 µC/cm2, and a remanent polarization of 30 µC/cm2. No degradation of the electrical properties was observed even after 2×1011 cycles using 1 MHz square wave form at ±10 V. Retention test revealed no appreciable data loss after 30000 s of memory retention at room temperature.