Paraffins have been widely used in analogue modelling of geological processes. Petrolatum and paraffin oil are commonly used to lubricate model boundaries and to simulate weak layers. In this paper, we present rheological tests of petrolatum, paraffin oil and several homogeneous mixtures of the two. The results show that petrolatum and all petrolatum-paraffin oil mixtures are strain, strain rate and temperature dependent under typical experimental strain rates (10-3 – 10-1 s-1). For the same conditions, pure paraffin oil is a slightly temperature-dependent, linear, Newtonian fluid. All mixtures have yield stress and flow stress (strain softening) values that decrease with decreasing shear rate, and with increasing relative amounts of paraffin oil. The degree of strain rate dependence (shear thinning) also decreases with increasing paraffin oil content. Because these materials have rheologies that can be characterized and controlled, they are suitable for use in a large number of analogue model settings, either as a lubricant or to simulate weak layers. When used as a lubricant, mixtures with higher paraffin oil content should perform better than pure petrolatum.