Published in

Trans Tech Publications, Advanced Materials Research, (931-932), p. 803-807, 2014

DOI: 10.4028/www.scientific.net/amr.931-932.803

Links

Tools

Export citation

Search in Google Scholar

Estimation of Site Dynamic Characteristics from Ambient Noise Measurements Using HVSR Method in Microzonation Study: Senggarang, Batu Pahat, Malaysia

This paper is available in a repository.
This paper is available in a repository.

Full text: Download

Red circle
Preprint: archiving forbidden
Red circle
Postprint: archiving forbidden
Green circle
Published version: archiving allowed
Data provided by SHERPA/RoMEO

Abstract

Site dynamic characteristics evaluation of fundamental ground frequency, Fo and amplification factor, Ao in Senggarang region were presented in 2D and 3D contour maps (microzonation maps) based on the ambient noise measurements carried out using Lennartz 1 Hz tri-axial seismometer sensors. Reliability of Fo and Ao determined from the ambient noise technique has become the main key components in seismic hazard analysis, resonance effect assessment, predictions of sedimentary layer and shear wave velocity, through cheaper, non-destructive and quick methodology. 73 points of ambient noise records were analyzed using Horizontal-to-Vertical Spectral Ratio (HVSR) method in the boundary area of 800 m x 800 m with the grid spacing of 100 m x 100 m. Significant peaks of mean HVSR curves were checked against the criterions proposed by the SESAME guideline. Slight difference of the Fo contours pattern between the North-South (NS) and the East-West (EW) directions was observed, but vice versa to the Ao contours between both directions. Significant peaks of Fo values were distributed from 1.61 to 6.35 Hz, whereas the Ao values were found from 3.18 to 9.39. Wide gap between the ranges of Fo and Ao in respective direction have shown to the variation of sediment thicknesses. Meanwhile, dominance shape of significant peak from the HVSR curves may indicate to a large velocity contrast presence underneath the ground surfaces.