Published in

Elsevier, Bioresource Technology, 18(101), p. 6981-6986, 2010

DOI: 10.1016/j.biortech.2010.04.022

Links

Tools

Export citation

Search in Google Scholar

Anaerobic effluent disinfection using ozone: Byproducts formation

Journal article published in 2010 by G. H. R. Silva ORCID, L. A. Daniel, H. Bruning, W. H. Rulkens
This paper is available in a repository.
This paper is available in a repository.

Full text: Download

Green circle
Preprint: archiving allowed
Orange circle
Postprint: archiving restricted
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

This research was aimed at studying oxidation processes, coliform inactivation effectiveness and disinfection byproducts (DBPs) associated with the disinfection of anaerobic sanitary wastewater effluent with ozone applied at doses of 5.0, 8.0 and 10.0mg O(3)L(-1) for contact times of 5, 10 and 15 min. The wastewater used in this research was generated by the wastewater treatment plant (WWTP), University of São Paulo - Brazil. The total coliform inactivation range was 2.00-4.06 log(10), and the inactivation range for Escherichia coli was 2.41-4.65 log(10). Mean chemical oxygen demand (COD) reductions were 37.6%, 48.8% and 42.4% for doses of 5.0, 8.0 and 10.0mg O(3)L(-1), respectively. Aldehyde formation varied with dosage only when the ozone dose was increased from 5.0 to 8.0mg O(3)L(-1) for acetaldehyde and from 5.0 to 8.0 and from 8.0 to 10.0mg O(3)L(-1) for glyoxal.