Published in

Elsevier, Sensors and Actuators B: Chemical, 1-3(76), p. 103-107, 2001

DOI: 10.1016/s0925-4005(01)00593-7

Links

Tools

Export citation

Search in Google Scholar

High temperature nanobalance sensor based on langasite

Journal article published in 2001 by H. Fritze ORCID, H. L. Tuller, H. Seh, G. Borchardt
This paper is available in a repository.
This paper is available in a repository.

Full text: Download

Green circle
Preprint: archiving allowed
Orange circle
Postprint: archiving restricted
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

Desirable nanobalance applications such as thermogravimetry on thin films and gas sensing based on stoichiometry change of thin films at elevated temperatures require high temperature stable piezoelectric materials. However, the application temperature of current nanobalances is limited to approximately 450°C due to the intrinsic properties of standard piezoelectric materials.Materials such as langasite (La3Ga5SiO14) and related compounds are promising candidates for piezoelectric applications at high temperatures. Therefore, this material was investigated with respect to its ability to serve as a high temperature nanobalance.Langasite resonators are shown to exhibit bulk oscillations at temperatures of up to 900°C. The peak frequency of the real part of the impedance spectra is chosen as the characteristic frequency. At 800°C, the mass load response for a 0.78-mm thick resonator is 6.49 Hz cm2 μg−1. At temperatures above 900°C, the bulk resistivity of the resonator devices significantly attenuates the resonance signal.Langasite is found to be insensitive to oxygen partial pressures to temperatures of up to at least 600°C. Finally, the operation of a gas sensor using a langasite nanobalance with integrated TiO2 film is demonstrated at elevated temperatures for the first time.