The epoxy coating was cataphoretically deposited on steel and steel modified by electroplated Zn–Mn alloy of different chemical contents. The samples were immersed in 0.5 mol dm−3 NaCl solution for 60 days. The electrochemical impedance spectroscopy (EIS) analysis showed that the values of pore resistance for epoxy coating on steel and Zn–Mn alloy with 16 at.% Mn were two orders of magnitude higher, while the capacitance values were two orders of magnitude lower than those for the epoxy coating on Zn–Mn alloy substrates with 5 and 8 at.% Mn. It was assumed that the main reason for such a difference was metallic substrate dissolution during cataphoretic deposition, due to high pH (12.9). This assumption was supported by energy dispersive X-ray spectrometry (EDS) measurements showing that the amount of released Zn in epoxy coatings decreased as Mn percent in the Zn–Mn alloys increased. In addition, Zn–Mn alloy coatings on steel, as well as bare steel, were immersed in 0.1 mol dm−3 NaOH solution, pH 12.9, simulating conditions during cataphoretic deposition, and polarization resistance measurement in this solution indicated that Mn inclusions in Zn–Mn alloy substrate prevent Zn dissolution in alkaline medium.