Dissemin is shutting down on January 1st, 2025

Published in

Hindawi, International Journal of Antennas and Propagation, (2014), p. 1-8, 2014

DOI: 10.1155/2014/946781

Links

Tools

Export citation

Search in Google Scholar

Low SAR, Simple Printed Compact Multiband Antenna for Mobile and Wireless Communication Applications

Journal article published in 2014 by Kamel S. Sultan, H. H. Abdullah ORCID, E. A. Abdallah
This paper is made freely available by the publisher.
This paper is made freely available by the publisher.

Full text: Download

Green circle
Preprint: archiving allowed
Green circle
Postprint: archiving allowed
Green circle
Published version: archiving allowed
Data provided by SHERPA/RoMEO

Abstract

Simple multiband planar antenna for wireless communication applications is presented. The proposed antenna performs four resonant modes covering multibands of wireless standards, including LTE 700, GSM, DCS, PCS, UMTS, and LTE 2300/2500. Furthermore, it covers the ISM, WiMAX, and the WLAN bands. The geometry of the proposed antenna consists of a single FR4 substrate where an open cavity fed by a coplanar U-shaped monopole is etched on one side and a short-circuited meander line in the opposite side. The cavity by its nature supports a wide range of higher frequencies, while its boundary that consists of a thin monopole resonates at 900 MHz. The meander line in the opposite side supports the LTE 700 band. The operating bands ranges are (680–748 MHz), (870–960 MHZ), (1.36–1.59 GHz), and (1.71–2.56 GHz). The antenna size is 30 × 18 × 0.8 mm3. The antenna not only has a compact size but also supports a low SAR radiation at all the operating frequencies. The proposed antenna is tested using the four recommended test positions of the CTIA association where the proposed antenna reveals good performance in all test cases in the presence of handset (keypad, battery, speaker camera, RF circuit, and LCD) in talking position, and in standby position.