Published in

Elsevier, International Journal of Hydrogen Energy, 6(40), p. 2833-2839

DOI: 10.1016/j.ijhydene.2014.12.082

Links

Tools

Export citation

Search in Google Scholar

Analysis of accelerated degradation of a HT-PEM fuel cell caused by cell reversal in fuel starvation condition

Journal article published in 2015 by Fan Zhou ORCID, Søren Juhl Andreasen ORCID, Søren Knudsen Kær ORCID, Donghong Yu
This paper is available in a repository.
This paper is available in a repository.

Full text: Download

Green circle
Preprint: archiving allowed
Red circle
Postprint: archiving forbidden
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

This paper reports an accelerated degradation test of a high temperature PEM fuel cell under repeated H2 starvation condition. The H2 stoichiometry is cycled between 3.0 and 0.8 every 2 min during the test. The experimental results show that the polarity of the fuel cell is reversed under H2 starvation condition, and the cell performance indicated by cell voltage at H2 stoichiometry of 3.0 declines from 0.59 V to 0.41 V in 19 cycles. Since CO2 is detected in anode exhaust under H2 starvation condition, carbon corrosion is believed to be the reason for the degradation in this test. After the test, there is only a slight decrease in open circuit voltage of the fuel cell which implies the membrane is not affected by the test. The electrochemical impedance spectrum measurement shows that the H2 starvation can cause significant increase in the ohmic resistance and charge transfer resistance. By looking at the scanning electron microscopy image of the cross-section of the degraded MEA and comparing it with that of a pristine MEA, great loss in platinum in the anode catalyst layer and carbon corrosion between the anode catalyst layer and the gas diffusion layer are observed, which contribute to the increase in the charge transfer resistance and ohmic resistance, respectively. X-ray diffraction analysis indicates that there is an increase in the size of the platinum particle size on both anode and cathode.