More than 88 million tonnes of fly ash is generated in India each year. Most of the fly ash is of Class F type. The percentage utilization is around 10 to 15%. To increase its percentage utilization, an extensive investigation was carried out to use it in concrete. This article presents the results of an experimental investigation dealing with concrete incorporating high volumes of Class F fly ash. Portland cement was replaced with three percentages (40%, 45%, and 50%) of Class F fly ash. Tests were performed for fresh concrete properties: slump, air content, unit weight, and temperature. Compressive, splitting tensile, and flexural strengths, modulus of elasticity, and abrasion resistance were determined up to 365 days of testing.Test results indicated that the use of high volumes of Class F fly ash as a partial replacement of cement in concrete decreased its 28-day compressive, splitting tensile, and flexural strengths, modulus of elasticity, and abrasion resistance of the concrete. However, all these strength properties and abrasion resistance showed continuous and significant improvement at the ages of 91 and 365 days, which was most probably due to the pozzolanic reaction of fly ash. Based on the test results, it was concluded that Class F fly ash can be suitably used up to 50% level of cement replacement in concrete for use in precast elements and reinforced cement concrete construction.