Thiol-ene polymers possess physical, optical and chemical characteristics that make them ideal substrates for the fabrication of optofluidic devices. In this work, thiol-ene polymers are used to simultaneously create microfluidic channels and optical waveguides in one simple moulding step. The reactive functional groups present at the surface of the thiol-ene polymer are subsequently used for the rapid, one step, site-specific functionalization of the waveguide with biological recognition molecules. It was found that while the bulk properties and chemical surface properties of thiol-ene materials vary considerably with variations in stoichiometric composition, their optical properties remain mostly unchanged with an average refractive index value of 1.566 ± 0.008 for thiol-ene substrates encompassing a range from 150% excess ene to 90% excess thiol. Microfluidic chips featuring thiol-ene waveguides were fabricated from 40% excess thiol thiol-ene to ensure the presence of thiol functional groups at the surface of the waveguide. Biotin alkyne was photografted at specific locations using a photomask, directly at the interface between the microfluidic channel and the thiol-ene waveguide prior to conjugation with fluorescently labeled streptavidin. Fluorescence excitation was achieved by launching light through the thiol-ene waveguide, revealing bright fluorescent patterns along the channel/waveguide interface. This article is protected by copyright. All rights reserved.