Dissemin is shutting down on January 1st, 2025

Published in

American Chemical Society, Macromolecules, 6(44), p. 1450-1459, 2011

DOI: 10.1021/ma1026127

Links

Tools

Export citation

Search in Google Scholar

Super Gas Barrier of All-Polymer Multilayer Thin Films

Journal article published in 2011 by You-Hao Yang, Merid Haile, Yong Tae Park, Frank A. Malek, Jaime C. Grunlan ORCID
This paper is available in a repository.
This paper is available in a repository.

Full text: Download

Green circle
Preprint: archiving allowed
  • Must obtain written permission from Editor
  • Must not violate ACS ethical Guidelines
Orange circle
Postprint: archiving restricted
  • Must obtain written permission from Editor
  • Must not violate ACS ethical Guidelines
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

Thin film assemblies of branched polyethylenimine (PEI) and poly(acrylic acid) (PAA), deposited using the layer-by-layer technique, were studied in an effort to produce all-polymer thin films with low oxygen permeability. Altering the pH of PEI and PAA results in large thickness variations (from 90 nm to 4.74 μm for 30-bilayer films). Cross-linking these films with glutaraldehyde (GA) create an inhibition of polymer interdiffusion, causing exponential film growth to be reset. AFM images show the surface morphology of PEI/PAA assemblies can be controlled by the pH and the final polymer layer deposited, with surface roughness ranging from 2.1 to 49.1 nm. Most pH combinations failed to produce a film with high oxygen barrier, but 8 bilayers of PEI at pH 10 and PAA at pH 4 produce a 305 nm thick film with an oxygen transmission rate below 0.005 cm3/(m2 day). This unique thin film barrier (PO2 < 3.2 × 10−21 cm3 (STP) cm/(cm2 s Pa)) is a promising alternative to current polymeric membranes, flexible electronics, and food packaging materials.