Dissemin is shutting down on January 1st, 2025

Published in

International Society for Horticultural Science (ISHS), Acta Horticulturae, 1012, p. 1151-1157, 2013

DOI: 10.17660/actahortic.2013.1012.155

Links

Tools

Export citation

Search in Google Scholar

A New Real-Time Automated Method for Measuring In Situ Respiration Rates of Fresh Produce

Journal article published in 2013 by E. Collings, J. A. García Cas, J. O. Ortiz, L. A. Terry ORCID
This paper is available in a repository.
This paper is available in a repository.

Full text: Download

Orange circle
Preprint: archiving restricted
Red circle
Postprint: archiving forbidden
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

The majority of methods used for measuring respiration rate in fresh produce are usually based on a static model whereby gas is manually sampled from a hermetically sealed chamber after a nominal incubation period and the evolution of carbon dioxide measured by gas chromatography. In addition to this being time consuming, as a closed system, this can create a modified atmosphere (MA). Furthermore, analysis is usually performed on fruit samples after removal from in situ experimental conditions. Given these apparent weaknesses, a new automated real-time respiration method has been developed for the dynamic measurement of in situ respiration rates of fresh produce in multiple chambers. Fruit in standard fruit trays were stored within storage chambers of 320 L capacity. Controlled continuous air flow was ventilated into the chambers (7 L min-1) using a blower pump which prevented the development of a MA. Gas was automatically sub-sampled directly from each chamber via a 'pull mode' set up and analysed using a Sable Respirometry System (Sable Systems International, NV, USA). Sequencing was controlled by an MUX flow multiplexer. Gas measurements were recorded simultaneously using a CA-10 carbon dioxide, FC-10 oxygen and RH-300 water vapour pressure detector. Simultaneously, flow rate and barometric pressure was recorded which were later used in software calculations. Each chamber was sampled for 5 min, a total of three times (cycles) per day, allowing the acquisition of real-time respiration measurements. Despite the longer sampling time, respiration rates were found to be broadly in line with that reported by others. As an automated set up, with multiple chambers connected to the system, a continuous cycle of real time measurements can now be obtained by a single operator. The application of this new method to measure respiration rate of pear and avocado is discussed.