Polycaprolactone scaffolds were produced by electrospinning. Polymeric solutions in a mix of dichloromethane and dimethylformamide were electrospun to form fibers in the sub-micron range. Physical properties of the polycaprolactone solutions were characterized with respect to density, viscosity, conductivity and surface tension. Processing was optimized following Taguchi's methodology to select the set of processing parameters that resulted in producing fibers with the smallest diameters, minimum number of defects and with the narrowest distribution of fiber diameter. Morphology of electrospun fibers was qualitatively and quantitatively analyzed for the different sets of processing parameters. The optimum conditions found to electrospun polycaprolactone were used to process polycaprolactone solutions containing nano-particles of hydroxyapatite or bioactive glass. Bioactivity of nano-composite electrospun membranes in simulated body fluid was analyzed and biological response was tested by assessing proliferation and viability of MT3C3-E1 preosteoblasts cultured on polycaprolactone and its nanocomposite membranes. ; Spanish Ministry of Science and Innovation through the MCINN-MAT2010-21611-C03-01 project ; Silva, C.; Luz, G.; Gamboa Martínez, TC.; Mano, JF.; Gómez Ribelles, JL.; Gómez Tejedor, JA. (2014). Poly(epsilon-caprolactone) electrospun scaffolds filled with nanoparticles. Production and optimization according to Taguchi's methodology. Journal of Macromolecular Science Part B Physics. 53(5):781-799. doi:10.1080/00222348.2013.861304. ; Senia ; 781 ; 799 ; 53 ; 5