Dissemin is shutting down on January 1st, 2025

Links

Tools

Export citation

Search in Google Scholar

Wood-derived olefins by steam cracking of hydrodeoxygenated tall oils

This paper was not found in any repository; the policy of its publisher is unknown or unclear.
This paper was not found in any repository; the policy of its publisher is unknown or unclear.

Full text: Unavailable

Question mark in circle
Preprint: policy unknown
Question mark in circle
Postprint: policy unknown
Question mark in circle
Published version: policy unknown

Abstract

Bioresource Technology Vol.126 Nr.December, 48 - 55 ; Tall oil fractions obtained from Norwegian spruce pulping were hydrodeoxygenated (HDO) at pilot scale using a commercial NiMo hydrotreating catalyst. Comprehensive two dimensional gas chromatography (GC*GC) showed that HDO of both tall oil fatty acids (TOFA) and distilled tall oil (DTO) produced highly paraffinic hydrocarbon liquids. The hydrotreated fractions also contained fatty acid methyl esters and norabietane and norabietatriene isomers. Steam cracking of HDO-TOFA in a pilot plant revealed that high light olefin yields can be obtained, with 35.4wt.% of ethene and 18.2wt.% of propene at a coil outlet pressure (COP) of 1.7bara, a dilution of 0.45kg steam/kg HDO-TOFA and a coil outlet temperature (COT) of 820°C. A pilot plant coking experiment indicated that cracking of HDO-TOFA at a COT of 850°C results in limited fouling in the reactor. Co-cracking of HDO tall oil fractions with a typical fossil-based naphtha showed improved selectivity to desired light olefins, further demonstrating the potential of large scale olefin production from hydrotreated tall oil fractions in conventional crackers