AbstractThis manuscript explains the establishment andvalidation of metrological traceability of calibration for routine measurement procedures using common medical decision-making criteria. Metrological traceability is considered the basis for achieving comparability of measurement results in laboratory medicine. This concept is supported by European legislation, which demands that manufacturers provide assurance andd emonstrate metrological traceability of in vitro Diagnostic Medical Devices. The guidance to comply with these legislative requirements is available in different CEN/ISO standards and is used as a basis of this manuscript. The goals andaccomplishments in metrological traceability of SI- and non-SI analytes is considered. Specific problems, such as non-availability of primary reference materials and measurement procedures, lack of official endorsement, andnon-commutability of certain reference materials are discussed. With respect to non-commutability, the use of split-sample measurements is advocated. Also, the expression of measurement uncertainty associatedwith the application of the metrological traceability chain is discussed. In addition, the needfor post-market vigilance assessment of traceable performance is considered. Finally, laboratory medicine scientific and professional societies, diagnostics manufacturers, and clinicians are urged to share responsibilities for understanding the implications of metrological traceability of routine measurements.