Dissemin is shutting down on January 1st, 2025

Published in

Taylor and Francis Group, International Journal of Hyperthermia, 1(23), p. 59-67, 2007

DOI: 10.1080/02656730601150522

Links

Tools

Export citation

Search in Google Scholar

A head and neck hyperthermia applicator : theoretical antenna array design

This paper is available in a repository.
This paper is available in a repository.

Full text: Download

Green circle
Preprint: archiving allowed
Green circle
Postprint: archiving allowed
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

abstractPurpose: Investigation into the feasibility of a circular array of dipole antennas to deposit RF-energy centrally in the neck as a function of: (1) patient positioning, (2) antenna ring radius, (3) number of antenna rings, (4) number of antennas per ring and (5) distance between antenna rings. Materials and Methods: Power absorption (PA) distributions in realistic, head and neck, anatomy models are calculated at 433 MHz. Relative PA distributions corresponding to different set-ups were analysed using the ratio of the average PA (aPA) in the target and neck region. Results: Enlarging the antenna ring radius from 12.5cm to 25 cm resulted in a ~21% decrease in aPA. By changing the orientation of the patients with respect to the array an increase by ~11% was obtained. Increase of the amount of antenna rings led to a better focussing of the power (1 - 2 / 3: ~17%). Increase of the distance between the antenna rings resulted in a smaller (more target region conformal) focus but also a decreased power penetration. Conclusions: A single optimum array setup suitable for all patients is difficult to define. Based on the results and practical limitations a setup consisting of two rings of six antennas with a radius of 20 cm and 6 cm array spacing is considered a good choice providing the ability to heat the majority of patients.text