Dissemin is shutting down on January 1st, 2025

Published in

Elsevier, Biosensors and Bioelectronics, 1(29), p. 140-144, 2011

DOI: 10.1016/j.bios.2011.08.007

Links

Tools

Export citation

Search in Google Scholar

Piezoelectric immunosensor for direct and rapid detection of staphylococcal enterotoxin A (SEA) at the ng level

This paper was not found in any repository, but could be made available legally by the author.
This paper was not found in any repository, but could be made available legally by the author.

Full text: Unavailable

Green circle
Preprint: archiving allowed
Orange circle
Postprint: archiving restricted
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

A direct, label-free immunosensor was designed for the rapiddetection and quantification of staphylococcal enterotoxin A (SEA) in buffered solutions using quartz crystal microbalance with dissipation (QCM-D) as transduction method. The sensing layer including the anti-SEA antibody was constructed by chemisorption of a self-assembled monolayer of cysteamine on the gold electrodes placed over the quartz crystal sensor followed by activation of the surface amino groups with the rigid homobifunctional cross-linker 1,4-phenylene diisothiocyanate (PDITC) and covalent linking of binding protein (protein A or protein G). Four anti-SEA antibodies (two of which from commercial source) have been selected to set up the most sensitive detection device. With the optimized sensing layer, a standard curve for the direct assay of SEA was established from QCM-D responses within a working range of 50-1000 or 2000 ng ml−1 with a detection limit of 20 ng ml−1. The total time for analysis was 15 min. Using a sandwich type assay, the response was ca. twice higher and consequently the lowest measurable concentration dropped down to 7 ng ml−1 for a total assay time of 25 min.