AbstractEvidence of microscopic inhomogeneities of the side source/drain contacts in 300 mm wafer integrated MoS₂ field-effect transistors is presented. In particular, the presence of a limited number of low Schottky barrier spots through which channel carriers are predominantly injected is demonstrated by the dramatic current changes induced by individual charge traps located near the source contact. Two distinct types of “contact-impacting traps” are identified. Type-1 trap is adjacent to the contact interface and exchanges carriers with the metal. Its impact is only observable when the adjacent contact is the reverse-biased FET source and limits the channel current. Type-2 trap is located in the AlO_x gate oxide interlayer, near the source contact, and exchanges carriers with the channel. Its capture/emission time constants exhibit both a gate and drain bias dependence due to the high sensitivity of the contact regions to the applied lateral and vertical fields. Unlike typical channel-impacting oxide traps, both types of reported defects affect the Schottky barrier height and width rather than the threshold voltage and result in giant random telegraph noise (RTN). These observations indicate that the contact quality and geometry play a fundamental role in the ultimate scaling of 2D FETs.