Abstract To reduce the risk of severe damage to the vessel and inner peripherals of any tokamak and its safe operation, a robust technique for the mitigation of runaway electrons (REs) is required. The REs in ADITYA tokamak are effectively mitigated by an application of local vertical magnetic field (LVF) perturbation. The LVF perturbation is applied using a pair of electromagnetic coils placed at the top and bottom of the ADITYA vacuum vessel in a Helmholtz configuration at one toroidal location. Powered by a capacitor bank power supply, these coils can produce a localized vertical magnetic field at the plasma center in the range of ∼150 G–260 G for a variable duration of 5–20 ms. The LVF pulse is first applied at the breakdown/current-ramp phase, where the REs are generated in the discharges initiated by the conventional ohmic breakdown in ADITYA. With the application of LVF pulse the REs are significantly reduced as indicated by the reduction in the REs generated hard x-ray flux. It has been observed that to extract the REs efficiently, an LVF pulse of magnitude at least ∼1% of the toroidal magnetic field with a minimum duration of ∼5 ms should be applied. The LVF perturbation is applied at different times into the discharge, i.e. during the breakdown/current ramp-up phase and current flat-top phase. The REs are significantly reduced in all the phases and improved discharge consistency. The LVF acts as an error field and a short-pulse of the LVF influences the REs more in comparison to the thermal electrons due to the faster velocities of the REs.