Abstract A major remaining challenge for Nb₃Sn high field magnets is their training due to random temperature variations in the coils. The main objective of our research is to reduce or eliminate it by finding novel impregnation materials in replacement of the epoxies currently used. An organic olefin-based thermosetting dicyclopentadiene resin, C₁₀H₁₂, commercially available in Japan as TELENE^® by RIMTEC, was used to impregnate a short Nb₃Sn undulator coil developed by ANL and FNAL. This magnet reached short sample limit after only two quenches, compared with ∼100 when CTD-101K^® was used. Ductility, i.e. the ability to accept large strains, and toughness were identified as key properties to achieve these results. In addition, we have been investigating whether mixing TELENE with high heat capacity ceramic powders such as Gd₂O₃, Gd₂O₂S, and HoCu₂, increases the specific heat (C_p ) of impregnated Nb₃Sn superconducting magnets. The viscosity, heat capacity, thermal conductivity, and other physical properties of TELENE with high-C_p powder fillers were measured in this study as a function of temperature and magnetic field. The TELENE-87 wt%Gd₂O₂S had a peak in C_p between 4.3 K and 5.3 K at fields between 0 and 8 T. We have also investigated the effect on the mechanical properties of pure and mixed TELENE under 10 MGy of gamma ray irradiation at the Takasaki Advanced Radiation Research Institute in Takasaki, Japan. TELENE-87 wt%Gd₂O₂S exhibited exceptional radiation resistance. Impregnating an undulator coil with TELENE mixed with Gd₂O₂S powder will verify whether the coils’ thermal stability further improves, or whether its low diffusivity will require engineering the material with high-thermal conductivity components. Short magnet training will lead to better magnet reliability, lower magnet margins, lower risk and substantial saving in accelerators’ commissioning costs. Part of this study is supported by the U.S.-Japan Science and Technology Cooperation Program in high energy physics operated by MEXT in Japan and DOE in the U.S.