AbstractMagnetic localizers have been widely investigated in the biomedical field, especially for intra-body applications, because they don’t require a free line-of-sight between the implanted magnets and the magnetic field sensors. However, while researchers have focused on narrow and specific aspects of the localization problem, no one has comprehensively searched for general design rules for accurately localizing multiple magnetic objectives. In this study, we sought to systematically analyse the effects of remanent magnetization, number of sensors, and geometrical configuration (i.e. distance among magnets—L_inter-MM—and between magnets and sensors—L_MM-sensor) on the accuracy of the localizer in order to unveil the basic principles of the localization problem. Specifically, through simulations validated with a physical system, we observed that the accuracy of the localization was mainly affected by a specific angle ($\theta$ θ = tan⁻¹(L_inter-MM / L_MM-sensor)), descriptive of the system geometry. In particular, while tracking nine magnets, errors below ~ 1 mm (10% of the length of the simulated trajectory) and around 9° were obtained if θ ≥ ~ 31°. The latter proved a general rule across all tested conditions, also when the number of magnets was doubled. Our results are interesting for a whole range of biomedical engineering applications exploiting multiple-magnets tracking, such as human–machine interfaces, capsule endoscopy, ventriculostomy interventions, and endovascular catheter navigation.