Published in

Taylor and Francis Group, Integrated Ferroelectrics, 1-4(38), p. 31-38, 2001

DOI: 10.1080/10584580108016915

Links

Tools

Export citation

Search in Google Scholar

Piezoelectric hysteresis measurement using atomic force microscopy

This paper was not found in any repository, but could be made available legally by the author.
This paper was not found in any repository, but could be made available legally by the author.

Full text: Unavailable

Red circle
Preprint: archiving forbidden
Orange circle
Postprint: archiving restricted
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

Local piezoelectric hysteresis of Pb(Zr Ti)O3 Thin films were measured using Atomic force microscopy and lock in amplifier. PZT films were prepared by sol-gel processing and rf sputtering. PZT films exhibit inverse piezoelectric response on application of a voltage. To detect such a small response of the thin(less than 100nm in thickness) PZT films, ac modulation technique was used. Actual displacements were obtained by the calibration of the first harmonic signal(Acos0) from x-cut quartz crystal(piezoelectric coefficient of 23pm/v) Coercive voltages and th maximum displacements were measured. respectively from the deconvoluted phase and amplitude. As calibrated, the effective local piezoelectric coefficient were 5.8 and 11.5 in arbitrary unit from sol-gel processed and sputtered films. In case of the PZT films processed by sol-gel technique showed a larger local variation of the piezoelectric response and smaller displacements than the sputtered PZT films with similar film thickness ; Korean Ministry of Science and Technology ; 신소재공학과