ABSTRACT Increasing the efficiency of solar dryers with ensuring that the system remains accessible to all users can be achieved with their automation through low-cost and easy-to-use technique sensors. The objective was to develop, implement and evaluate an automatic system for monitoring drying parameters in a hybrid solar-electric dryer (HSED). Initially, an automated data acquisition system for collecting the parameters of sample mass, air temperature, and relative air humidity was developed and installed. The automatic mass data acquisition system was calibrated in the hybrid solar-electric dryer. The automated system was validated by comparing it with conventional devices for measuring the parameters under study. The data obtained were subjected to analysis of variance, Tukey test and linear regression at p ≤ 0.05. The system to turn on/off the exhaust worked efficiently, helping to reduce the errors related to the mass measurement. The GERAR Mobile App showed easy to be used since it has intuitive icons and compatibility with the most used operating systems for mobile devices. The responses in communication via Bluetooth were fast. The use of Arduino, a low-cost microcontroller, to automate the monitoring activity allowed estimating the mass of the product and collecting the drying air temperature and relative air humidity data through the DHT22. This sensor showed a good correlation of mass and air temperature readings between the automatic and conventional system, but low correlation for relative air humidity. In general, the automatic data acquisition system monitored in real time the parameters for drying agricultural products in the HSED.