Published in

CSIRO Publishing, International Journal of Wildland Fire, 7(19), p. 895

DOI: 10.1071/wf09009

Links

Tools

Export citation

Search in Google Scholar

Thermodynamic structure of a grass fire plume

Journal article published in 2010 by Craig B. Clements ORCID
This paper was not found in any repository, but could be made available legally by the author.
This paper was not found in any repository, but could be made available legally by the author.

Full text: Unavailable

Green circle
Preprint: archiving allowed
Green circle
Postprint: archiving allowed
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

High-frequency thermocouple measurements were made during an experimental grass fire conducted during ideal weather with overcast and windy conditions. Analysis of the thermodynamic structure of the fire plume showed that a maximum plume temperature of 295.2°C was measured directly above the combustion zone. Plume heating rates were on the order of 26–45 kW m–2 and occurred in the region just above the combustion zone between 10 and 15 m above ground level and were followed by cooling of approximately –37 and –44 kW m–2. The observed cooling was caused by strong entrainment that occurred behind the fire front and plume. The rapid heating and subsequent cooling indicate that the heating caused by a fire front is limited to a small volume around the flaming front and that the rates of heat gain occur for a short duration. The short duration of plume heating is due to the fast rate of spread of the fire front and ambient wind.