AbstractEurofer97 steel has been recognised in Europe as the reference steel for nuclear application under high radiation density. Following to this a detailed knowledge of microstructure evolution is required for such steel after thermo-mechanical processing. In this paper the effect of thermo-mechanical parameters on the mechanical behavior of Eurofer97 was investigated by hot rolling and heat treatment on pilot scale. Results show a strong effect was found of reheating temperature before rolling on the material hardness, due to an increase of hardenability following the austenite grain growth. A minor effect was found of the hot reduction and the tempering temperature in the total investigated deformation range. A loss of impact energy was found coupled with the hardness increase.