Americo Scotti - Dissemin

All papers authored by Americo Scotti

This paper was not found in any repository, but could be made available legally by the author.

2017 Diego Costa Correia Silva, Américo Scotti

Using either Mean or RMS values to represent current in modeling of arc welding bead geometries

Upload

This paper is made freely available by the publisher.

2016 Cruz-Crespo,Amado, Ferraressi,Antonio Valtair, Scotti,Américo, Fernández-Fuentes,Rafael, Antonio Valtair Ferraressi, Gonçalves,Rafael Ariza, Rafael Ariza Gonçalves, Américo Scotti

Microstructure and Abrasion Resistance of Fe-Cr-C and Fe-Cr-C-Nb Hardfacing Alloys Deposited by S-FCAW and Cold Solid Wires

Download from dx.doi.org

Meneses,Valter Alves De, Leal,Valdemar Silva, Scotti,Américo, Valter Alves de Meneses, Valdemar Silva Leal, Américo Scotti

Influence of Metal Transfer Stability and Shielding Gas Composition on CO and CO2 Emissions during Short-circuiting MIG/MAG Welding

Download from dx.doi.org

K. Hurtig, I. Choquet, A. Scotti

, L.-E. Svensson

A critical analysis of weld heat input measurement through a water-cooled stationary anode calorimeter

Upload

Américo Scotti

Five-bar and one-bar models for thermal stress generation in the FZ, HAZ, and BM during arc welding

Upload

This paper is available in a repository.

Edson Kazuo Hirata, Luiz Felipe Beltzac, Paulo César Okimoto, Américo Scotti

Influence of Current on the Gross Fusion Efficiency in MIG/MAG Welding

Download from www.researchgate.net

2015 André Alves de Resende, André Alves de Resende, Américo Scotti

Influência dos Níveis das Correntes, Ângulo de Inclinação da Tocha e Distância entre a Tocha e a Peça sobre a Geometria do Cordão de Solda Usando “Plasma-MIG” com Arcos Concêntricos

Download from dx.doi.org

Olga Liskevych, Américo Scotti

Determination of the gross heat input in arc welding

Upload

Caimacan,Dumitru, Scotti,Américo, Artigos Técnicos, Dumitru Caimacan, Mishchenko,Andrii, Andrii Mishchenko, Américo Scotti

Avaliação do Uso de Curto-Circuito Controlado em Soldagens de Passes de Enchimento por MIG/MAG Duplo Arame

Download from dx.doi.org

Labiapari,Wilian da Silva, Scotti,Américo, Víctor Augusto Nascimento Magalhães, Magalhães,Víctor Augusto Nascimento, Wilian da Silva Labiapari, Vladimir Ponomarev, Ponomarev,Vladimir, Américo Scotti

O Papel do Pó de Ferro no Mecanismo de Deposição de Eletrodos Revestidos

Download from dx.doi.org

Mishchenko,Andrii, Scotti,Américo, Andrii Mishchenko, Caimacan,Dumitru, Dumitru Caimacan, Americo Scotti

Assessment of the Use of Negative Polarity in Double-Wire MIG/MAG-Welding Filling Passes

Download from dx.doi.org

This paper was not found in any repository; the policy of its publisher is unknown or unclear.

A. S. C. M. D?oliveira, A. S. C. M. D’oliveira, A. Scotti

A reflection on the journal Soldagem & Inspeção in the context of international and Brazilian evaluation indices | Uma reflexão sobre a revista soldagem & inspeção no contexto dos índices de avaliação internacionais e Brasileiro

Upload

2014 Américo Scotti

, Vladimir Ponomarev, William Lucas

Interchangeable metal transfer phenomenon in GMA welding: Features, mechanisms, classification

Download from doi.org

Olga Liskevych, Américo Scotti

Influence of the CO2 content on operational performance of short-circuit GMAW

Download from www.researchgate.net

Scotti,Américo, Americo Scotti

, Huijun Li, Li,Huijun, Miranda,Rosa M., Rosa M. Miranda

A round-robin test with thermal simulation of the welding HAZ to draw CCT diagrams: a need for harmonized procedures and microconstituent terminologies

Download from dx.doi.org

Américo Scotti

, Valter Alves de Meneses

Governing parameters affecting fume generation in short-circuit MAG welding

Upload

Valter Alves de Meneses, João Fernando Pereira Gomes, Americo Scotti

, Valter Alves do Nascimento

The effect of metal transfer stability (spattering) on fume generation, morphology and composition in Short-Circuit MAG Welding

Download from doi.org

A. Scotti

Five bars and one bar models for thermal stress generation in the FZ, HAZ and BM during Arc welding | Modelos de cinco barras e de uma barra para geração de tensões térmicas na ZF, ZAC e MB durante soldagem

Upload

2013 Braga,Eduardo de Magalhães, Scotti,Américo, Tárcio dos Santos Cabral, Cabral,Tárcio dos Santos, Eduardo de Magalhães Braga, Mendonça,Everton Augusto Maciel, Everton Augusto Maciel Mendonça, Américo Scotti

Influência dos procedimentos e modos de transferência no processo MAG na redução de deformações em painéis de estruturas navais

Download from dx.doi.org

Cruz,Juliane Ribeiro Da, Juliane Ribeiro da Cruz, Scotti,Américo, Juliane Ribeiro da Cruz, Américo Scotti

Materiais para eletrodos que emitem termionicamente em soldagem a arco

Download from dx.doi.org

Missing publications? Search for publications with a matching author name.

Researcher

Statistics

Refine

All papers authored by Americo Scotti