Published in

American Chemical Society, ACS Nano, 7(6), p. 5941-5951, 2012

DOI: 10.1021/nn3008096

Links

Tools

Export citation

Search in Google Scholar

Preparation of supercapacitor electrodes through selection of graphene surface functionalities

This paper was not found in any repository, but could be made available legally by the author.
This paper was not found in any repository, but could be made available legally by the author.

Full text: Unavailable

Green circle
Preprint: archiving allowed
  • Must obtain written permission from Editor
  • Must not violate ACS ethical Guidelines
Orange circle
Postprint: archiving restricted
  • Must obtain written permission from Editor
  • Must not violate ACS ethical Guidelines
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

In order to investigate the effect of graphene surface chemistry on the electrochemical performance of graphene/polyaniline composites as supercapacitor electrodes, graphene oxide (G-O), chemically reduced G-O (RG-O), nitrogen-doped RG-O (N-RG-O), and amine-modified RG-O (NH(2)-RG-O) were selected as carriers and loaded with about 9 wt % of polyaniline (PANi). The surface chemistry of these materials was analyzed by FTIR, NEXAFS, and XPS, and the type of surface chemistry was found to be important for growth of PANi that influences the magnitude of increase of specific capacitance. The NH(2)-RG-O/PANi composite exhibited the largest increase in capacitance with a value as high as 500 F g(-1) and good cyclability with no loss of capacitance over 680 cycles, much better than that of RG-O/PANi, N-RG-O/PANi, and G-O/PANi when measured in a three-electrode system. A NH(2)-RG-O/PANi//N-RG-O supercapacitor cell has a capacitance of 79 F g(-1), and the corresponding specific capacitance for NH(2)-RG-O/PANi is 395 F g(-1). This research highlights the importance of introducing -NH(2) to RG-O to achieve highly stable cycling performance and high capacitance values.