Dissemin is shutting down on January 1st, 2025

Published in

Elsevier, Alexandria Engineering Journal, 2(53), p. 417-426, 2014

DOI: 10.1016/j.aej.2014.03.003

Links

Tools

Export citation

Search in Google Scholar

Performance of SBR for the treatment of textile dye wastewater: Optimization and kinetic studies

Journal article published in 2014 by S. Sathian, M. Rajasimman ORCID, G. Radha, V. Shanmugapriya, C. Karthikeyan
This paper is made freely available by the publisher.
This paper is made freely available by the publisher.

Full text: Download

Green circle
Preprint: archiving allowed
Green circle
Postprint: archiving allowed
Green circle
Published version: archiving allowed
Data provided by SHERPA/RoMEO

Abstract

In this work, sequential batch reactor (SBR) was employed for the treatment of textile dye wastewater. The performance of four white rot fungi (WRF) viz. Coriolus versicolor, Pleurotus floridanus, Ganoderma lucidum and Trametes pubescens was evaluated in pure and mixed combinations in terms of decolorization. From the results it was found that the combination of Pleurotus floridanus, Ganoderma lucidum and Trametes pubescens was best and they were used in the SBR. The process parameters like air flow rate, sludge retention time (SRT) and cycle period were optimized using response surface methodology (RSM). At these optimized conditions, treatment of textile dye wastewater was carried out at various initial dye wastewater concentration and hydraulic retention time. The performance of SBR was analyzed in terms of decolorization, COD reduction and sludge volume index (SVI). From the results it was found that a maximum decolorization and COD reduction of 71.3% and 79.4%, respectively, was achieved in the SBR at an organic loading rate of 0.165 KgCOD/m3 d. The sludge volume index (SVI) was found to be low in the range of 90–103 mL/g. The kinetic study was carried out using a first order based model and the degradation follows the first order system.