Published in

9th IEEE International Workshop on Advanced Motion Control, 2006.

DOI: 10.1109/amc.2006.1631642

Links

Tools

Export citation

Search in Google Scholar

Accurate friction compensation for precision stage using synchronous piezoelectric device driver

This paper was not found in any repository, but could be made available legally by the author.
This paper was not found in any repository, but could be made available legally by the author.

Full text: Unavailable

Green circle
Preprint: archiving allowed
Green circle
Postprint: archiving allowed
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

It is well-known that one of the major limitations to achieve a good performance in mechanical systems is the presence of friction. High resolution positioning systems operating with accuracies in nanometer region usually exhibit relatively large steady-state tracking errors or even oscillations if controllers are designed without considering friction. Consequently, this paper aims at improving the position control of a high precision stage using a synchronous piezoelectric device driver (SPIDER) by comparing the performances of three friction compensators. These friction compensators detect friction in the system and use this information to modify the control input. The first using bang-bang control is based on the well-known static friction model. The second is a friction state observer based on the dynamic friction LuGre model, and the third is a feed-forward compensator based on the LuGre model. In order to effect a fair comparison, three friction compensators use the same identified friction parameters in controller synthesis. The performance comparisons are presented by means of experimental results on the proposed high precision stage using SPIDER