The generation of biomass residues in different productive activities of rural communities in Mexico represents an area of opportunity for the generation of bioenergy for various purposes. Solid biofuels (SBF), for example, are an alternative for the exploitation of these residues. The present study shows a comprehensive proposal for the analysis of residues of Pinus spp. generated by the artisanal sector of a rural community in Mexico. The proposal is based on four stages: a) characterization of the physico-chemical and functional properties of the residues, by Scanning Electron Microscopy (SEM), Infrared (FTIR) and Raman Spectroscopy, Thermogravimetry (TGA-DTG), determining the calorific coefficient and polymeric compounds present by fiber analysis; (b) spatial, temporal and dimensional analysis of the waste generated in the town studied; (c) assessment of the energy potential available in space and time; (d) definition of guidelines for the management of solid biofuels for the community through collection, processing and final disposal centers. The results of the assessment of timber residue from 50 artisan workshops that represent 25% of the total in the community show that the identified heating value of the dry residue ranges from 17.6 MJ/kg to 18.1 MJ/kg, attributed to the presence of polymeric compounds such as cellulose, hemicellulose and lignin, the latter in the order of 28%, which contributes to a high energy potential, and whose compounds were identified by TGA-DTG analysis, FTIR, SEM and fiber analysis. The energy potential was estimated at approximately 7 TJ/year for the analyzed workshops. In which case, the economic savings obtained from unburned firewood would amount to about $20,000 USD/year. As regards the reduction in firewood consumption due to the use of residues for energy purposes, about 350 Tn/year would be mitigated, which would reduce the community’s emissions by more than 76 TnCO2/year. A strategic management proposal was also established, aimed at providing spaces for the collection, processing and final disposal of solid biofuels from wood residues, which in sum represent an energy alternative that is sustainable in environmental, economic and social terms, for the same community.