This research aims to study the removal of Cobalt (Co) using chitin. The optimum conditions for removing Co were ascertained through batch experiments. This study involves the determination of chitin metal-binding efficiency by using a polymer enhanced diafiltration setup that utilizes a membrane process (ultrafiltration) to keep the Chitin. The effects of several parameters on sorption like pH, the concentrations of chitin, and Co were examined. The best efficiency was reached if the setup was run at pH < 6.3 (i.e., chitin pKa). At acidic conditions and by employing 6 g/L of chitin, Co level (20 mg/L) was decreased at 95%. To further investigate the kinetics of sorption for each gram of chitin, equilibrium experiments were carried out. For 1–100 mM Co, the performed rheological measurements show that chitin was observed to be moderately shear thickening at relatively lower levels (4 and 6 g/L); further, it was moderately shear thinning at slightly more important levels (12 and 20 g/L). Some improvement of the raw polymer will be necessary to enhance sorption to a sustainable limit and make this scheme an economically viable process.