Published in

De Gruyter, Journal of Polymer Engineering, 8(40), p. 693-702, 2020

DOI: 10.1515/polyeng-2020-0068

Links

Tools

Export citation

Search in Google Scholar

Green composites based on Atriplex halimus fibers and PLA matrix

Journal article published in 2020 by Hayet Latifa Boudjema ORCID, Hayet Bendaikha, Ulrich Maschke
Distributing this paper is prohibited by the publisher
Distributing this paper is prohibited by the publisher

Full text: Unavailable

Red circle
Preprint: archiving forbidden
Red circle
Postprint: archiving forbidden
Orange circle
Published version: archiving restricted
Data provided by SHERPA/RoMEO

Abstract

Abstract This work focuses on the potential use of cellulose fibers extracted from Mediterranean saltbush (Atriplex halimus) as a filler in the polymeric matrix. The fully biodegradable composites were prepared from polylactic acid (PLA) as matrix and microcellulose fibers ranging from 0 to 15 wt.%. The influence of the fiber content on the structure, mechanical, thermal, and water absorption properties was evaluated. Mechanical results indicated that fibers acted effectively as reinforcement, increasing the tensile strength and the Young’s modulus of PLA by 25 and 45%, respectively. This is due to the good stress transfer between fibers and matrix through the strong interactions that have been evidenced by Fourier Transform Infrared (FTIR) spectroscopy. The thermogravimetric analysis showed that PLA composites have a slightly lower degradation temperature than the pure PLA, but they still have favorable thermal stability. Water absorption measurements and biodegradability tests showed that the addition of fibers accelerates degradation kinetics and confirm that the prepared composites are an environmentally safe material suited for different applications.