Published in

Elsevier, Journal of Power Sources, (262), p. 316-322

DOI: 10.1016/j.jpowsour.2014.03.133

Links

Tools

Export citation

Search in Google Scholar

Durability of high performance Ni-yttria stabilized zirconia supported solid oxide electrolysis cells at high current density

Journal article published in 2014 by Per Hjalmarsson, Xiufu Sun ORCID, Yi-Lin Liu, Ming Chen ORCID
This paper is available in a repository.
This paper is available in a repository.

Full text: Download

Green circle
Preprint: archiving allowed
Red circle
Postprint: archiving forbidden
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

We report the durability of a solid oxide electrolysis cell (SOEC) with a record low initial area specific resistance (ASR) and a record low degradation rate. The cell consists of a Ni-yttria stabilized zirconia (YSZ) cermet as support and active fuel electrode, a YSZ electrolyte, a gadolinia doped ceria (CGO) inter-diffusion barrier, and a strontium doped lanthanum cobaltite (LSC)-CGO composite oxygen electrode. The cell was tested at 800 °C and -1 A cm-2 converting 31% of a 0.1:0.45:0.45 mixture of H2:H2O:CO2 for approximately 2700 h, demonstrating an initial ASR of 200 mΩ cm2 and a steady degradation rate of ≤12 mV (or 0.9%) per 1000 h. Electrochemical impedance spectroscopy (EIS) was used to study in situ changes in the electrochemical response of the cell and the retrieved data was treated to deconvolute resistive contributions from the physiochemical processes occurring within the cell. The results showed rapid initial fuel electrode degradation during the first 350 h followed by partial reactivation. The serial resistance was found to increase with time but in an exponentially decaying behavior. A discussion is made based on the detailed electrochemical results together with post-mortem microstructural analysis.