Published in

Taylor and Francis Group, Journal of Environmental Science and Health, Part A: Toxic/Hazardous Substances and Environmental Engineering, 8(37), p. 1483-1494

DOI: 10.1081/ese-120013271

Links

Tools

Export citation

Search in Google Scholar

Microbial and COD removal in a municipal wastewater treatment plant using coagulation flocculation process

This paper is available in a repository.
This paper is available in a repository.

Full text: Download

Red circle
Preprint: archiving forbidden
Orange circle
Postprint: archiving restricted
Red circle
Published version: archiving forbidden
Data provided by SHERPA/RoMEO

Abstract

This study was designed to improve the removal efficiency of COD, SS, and microorganism at the S. Giovanni a Teduccio municipal wastewater treatment plant, Naples, Italy. The plant consists of screen, sand grinder, oil removal, coagulation, flocculation and sedimentation units, hypochlorite disinfection, mechanical dewatering, and thermal sludge conditioning. A series of Jar-test was conducted on twelve samples taken after screen using FeSO4 alone or together with Ca(OH)2 at 100 rpm rapid mixing for 1 min, 30 rpm for slow mixing for 20 min and 30 min for settling. 150 mg L(-1) and 450 mg/L doses of FeSO4 were used at a pH interval in between 6 and 9. The removals of COD, TSS, Escherichia coli and total coliforms were measured ranging from 40 to 70%, 70 to 90%, 96 to 99% and 97 to 99%, respectively when FeSO4 was used alone at 150 mg L(-1) and 450 mg L(-1) doses and at pH 6, 7 and 8. Wastewater discharge standards could be safely obtained at 150 mg L(-1) dose of FeSO4 with the use of 220 mg L(-1) Ca(OH)2 at pH 8 in terms of COD and E. coli removals resulted in 65% and 98%, respectively, with less sludge production to be disposed. Additionally, none of influent and supernatant samples tested in this study was found to be acute toxic on 24h-born Daphnia magna at 50% dilution.